Location information
You can automatically add capture location
information to the file details of the captured material.
For example, in the Photos application you can then
view the location where an image was captured.
To add location information to all captured material,
in Camera, select Options > Settings > Record
location > Yes.
Location information indicators at the bottom of the
display:
●
— Location information unavailable. GPS stays
on in the background for several minutes. If a
satellite connection is found and the indicator
changes to
within that time, all the images and
video captured during that time are tagged based
on the received GPS positioning information.
●
— Location information is available. Location
information is added to the file details.
See "Still image camera settings", p. 91.
Files with location information are indicated by
in
the Photos application.
After taking a picture
After you take a picture, select from the following
options in the active toolbar (available only if Show
captured image is enabled in the still image camera
settings):
● If you do not want to keep the image, select
Delete (
).
● To send the image using a multimedia message, e-
mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or select
Send (
). See "Write and send messages", p. 123.
If you are in a call, select Send to caller (
).
● To add the image to an album, select Add to album
● To view information about the image, select Details
● To send the image to a compatible online album,
select
(available only if you have set up an
account for an album).
See " Share images and
videos online ", p. 101.
To zoom in an image after taking it, select Options >
Go to Photos to open the image, and use the zoom
keys of your device.
Camera
86
Camera
To Next Page
Loading...
