E-mail settings
Manage mailboxes
Press , and select Messaging > Options >
Settings > E-mail.
To select which mailbox you want to use to send e-
mail, select Mailbox in use and a mailbox.
To remove a mailbox and its messages from your
device, select Mailboxes, scroll to the desired mailbox,
and press C.
To create a new mailbox, in Mailboxes, select
Options > New mailbox. The name you give to the
new mailbox replaces New mailbox in the Messaging
main view. You can have up to six mailboxes.
Select Mailboxes and a mailbox to change the
connection settings, user settings, retrieval settings,
and automatic retrieval settings.
Connection settings
Press , and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Connection settings.
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
● User name — Enter your user name given to you
by your service provider.
● Password — Enter your password. If you leave this
field blank, you are prompted for the password
when you try to connect to your remote mailbox.
● Incoming mail server — Enter the IP address or
host name of the mail server that receives your e-
mail.
● Access point in use — Select an internet access
point (IAP).
See "Access points", p. 179.
● Mailbox name — Enter a name for the mailbox.
● Mailbox type — Defines the e-mail protocol that
your remote mailbox service provider recommends.
The options are POP3 and IMAP4. This setting
cannot be changed.
● Security — Select the security option used to secure
the connection to the remote mailbox.
● Port — Define a port for the connection.
● APOP secure login (for POP3 only) — Use with the
POP3 protocol to encrypt the sending of passwords
to the remote e-mail server while connecting to the
mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
● My e-mail address — Enter the e-mail address
given to you by your service provider.
Messaging
131
Messaging
To Next Page
Loading...
