Turning control and whether you want the display to
rotate automatically.
To ensure that the automatic display rotation works,
hold the device in an upright position.
Automatic rotation does not work if you change the
display rotation setting manually in an application.
When you exit the application, automatic rotation is
activated again.
Security settings
Phone and SIM
Press , and select Tools > Settings > General >
Security > Phone and SIM card and from the
following:
● PIN code request — When active, the code is
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
● PIN code, PIN2 code, and Lock code — You can
change the PIN code, PIN2 code, and lock code.
These codes can only include the numbers from 0 to
9.
If you forget the PIN or the PIN2 code, contact your
service provider. If you forget the lock code, contact
a Nokia Care point or your service provider. See
"Access codes", p. 21.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the
emergency number.
● Keypad autolock period — Select whether the
keypad is locked when your device has been idle for
a certain period of time.
● Phone autolock period — To avoid unauthorised
use, you can set a time-out after which the device
automatically locks. A locked device cannot be used
until the correct lock code is entered. To turn off the
autolock period, select None.
Tip: To lock the device manually, press the
power key. A list of commands opens. Select
Lock phone.
In the offline or flight profiles, you may need to unlock
the device and change to the calling profile before
making a call.
● Lock if SIM card changed — You can set the device
to ask for the lock code when an unknown SIM card
is inserted into your device. The device maintains a
list of SIM cards that are recognised as the owner’s
cards.
Settings
173
Settings
To Next Page
Loading...
