To zoom your image in or out, select Options >
Zoom.
To route the audio to a compatible headset with
Bluetooth connectivity attached to your device, select
Options > Activate handsfree. To route the audio
back to the loudspeaker of your device, select
Options > Activate handset.
To change the video quality, select Options > Video
preference. Normal quality is framerate 10 fps. Use
Clearer detailfor small, static details. Use Smoother
motion for moving images.
To adjust the volume during a video call, use the
volume key on the side of the device.
Answer or decline a video call
When a video call arrives, is displayed.
To answer the video call, press the call key. Allow
video image to be sent to caller? is displayed. To
start sending live video image, select Yes.
If you do not activate the video call, you only hear the
sound of the caller. A grey screen replaces the video
image. To replace the grey screen with a still image
captured by the camera in your device, select Tools >
Settings > Phone > Call > Image in video call.
To end the video call, press the end key.
Video sharing
Use video sharing (network service) to send live video
or a video clip from your mobile device to another
compatible mobile device during a voice call.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for
the voice call while you share video, you can also use
a compatible headset.
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UMTS network availability,
and fees associated with using this service, contact
your service provider.
To use video sharing you must do the following:
● Ensure that your device is set up for person-to-
person connections.
● Ensure you have an active UMTS connection and are
within UMTS network coverage. If you move outside
the UMTS network during a video sharing session,
the sharing stops while your voice call continues.
Make calls
140
Make calls
To Next Page
Loading...
