RX Tests
Prerequisites
Connect complete phone assembly with battery cover to a PC with Phoenix service software using a USB data
cable.
There are different options available for testing the Rx path. The simplest is to use the WLAN to report Rx
packets when operating in an area where there is an active WLAN network. Simply starting an Rx test will
show the number of packets detected by the WLAN module as it monitors the network. However, it does
require a properly configured WLAN network.
RX-51
BB Troubleshooting
Issue 1 COMPANY CONFIDENTIAL Page 3 –61
Copyright © 2009 Nokia. All rights reserved.
To Next Page
Loading...
