Using the FMTx panel to drive the FMTx 2.1 features
Figure 21 FMTx panel before connection to the handset
Figure 22 FMTx panel after connection to the handset
Typing in a valid FM transmitter frequency and clicking on ‘Activate’ will turn on the FMTx feature and will
begin transmitting the carrier on the selected frequency. Note: Unless this carrier signal is modulated with
some audio (either via the music player or a DSP or Si4713 generated tone) then all that will be heard if an
RX-51
BB Troubleshooting
Page 3 –72 COMPANY CONFIDENTIAL Issue 1
Copyright © 2009 Nokia. All rights reserved.
To Next Page
Loading...
