EasyManua.ls Logo

Nokia T-Mobile - Physical interfaces; Typical connection

Nokia T-Mobile
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T-Mobile High-Speed Internet Gateway Operator
Manual
ChapterTitleVariable
Issue: DRAFT Nokia 3TG-01275-AAAA-TCZZA 31
4.7 Physical interfaces
All physical interfaces for the T-Mobile High-Speed Internet Gateway, including
physical connectivity, are located on the backside of the unit as shown in Figure 4
and include:
one 100-240V AM power input port
5000 mAh battery
UPS system battery (optional)
two RJ45 LAN ports that can be used:
to connect up to two Gigabit Ethernet LAN ports (all ports are supported while
the Wi-Fi is working)
for local management of the T-Mobile High-Speed Internet Gateway through
a locally-connected PC, laptop, phone, or tablet (local management can also
be done through the Wi-Fi or Mesh Wi-Fi 6 system) using a Web-based
Graphical Interface (Web-GUI). See Chapter
9 for configuration procedures.
one USB 3.0 type-C port for connecting a USB-connected storage device
slot for 4FF/nano-sized SIM card
the following buttons:
power on/off button (see procedure 24)
reset button (see procedure 25)

Table of Contents

Related product manuals