Nokia T-Mobile - Viewing networks

ChapterTitleVariable
80
T-Mobile High-Speed Internet Gateway Operator
Manual
Nokia 3TG-01275-AAAA-TCZZA Issue: DRAFT
9.7 Viewing networks
You can view the network parameters, add an Access Point (AP), or configure the
Auto Configuration Server (ACS) from the Network web GUI menu option:
• Wi-Fi Networks (Procedure 21)
• Access Point (Procedure 22)
• Auto Configuration Server (ACS) - (Procedure 23)
Procedure 21 Wi-Fi 2.4GHz and 5GHz Wi-Fi networks settings
Use this procedure to configure the Wi-Fi 2.4GHz General Settings parameters for the T-Mobile
High-Speed Internet Gateway.
1 If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu.
2 If you have not already logged in, log into the web GUI by completing the steps in
procedure12.
3 Click Network.
Wi-Fi Networks, Access Point, and Auto Configuration Server (ACS) appear in the web GUI
menu.
4 Click the arrow beside Wi-Fi Networks.
2.4 GHz and 5GHz appear in the web GUI menu.
5 Click the down arrow beside Wi-Fi Networks.
The 2.4 GHz and 5GHz options appear in the web GUI menu.
Note — You will need to know the IP address of the T-Mobile
High-Speed Internet Gateway along with the user name and
password to perform these procedures. This information is
located on the label located on the bottom of the gateway.