Nokia T-Mobile - Installation; Unpacking the T-Mobile High-Speed Internet Gateway; Connecting power; Starting up

T-Mobile High-Speed Internet Gateway Operator
Manual
ChapterTitleVariable
Issue: DRAFT Nokia 3TG-01275-AAAA-TCZZA 39
5 Installation
5.1 Unpacking the T-Mobile High-Speed Internet Gateway
5.3 Connecting power
5.4 Starting up
5.5 Downloading the T-Mobile Broadband App
5.6 Checking LCD
5.7 Connecting to Wi-Fi
5.8 Managing the Wi-Fi network
5.9 Connecting Accessories (Optional)
5.10 Repositioning the T-Mobile High-Speed Internet Gateway
5.11 Connecting devices for Wi-Fi or a mesh network
5.12 Connecting Ethernet LANs
5.1 Unpacking the T-Mobile High-Speed Internet
Gateway
Installation of the T-Mobile High-Speed Internet Gateway is intended to be a simple
“Plug and Play” user experience for most installations. The T-Mobile High-Speed
Internet Gateway has four wide band OMNI antenna and 4G/5G signal strength
display on LCD on the top of the Gateway to allow you to locate an optimal location
for 5G signal reception. The self-guided device placement through touch screen for
optimal signal connection is also supported under battery mode.
Unbox the T-Mobile High-Speed Internet Gateway and ensure that all the package
includes one of the following:
• 5G Gateway
• AC cable
• Ethernet cable
Note — Refer to the T-Mobile High-Speed Internet Gateway
Customer Release Notes before installing the T-Mobile
High-Speed Internet Gateway.