67
Menu Description
Power On Source
Allows the user to enter the desired source directly after turning on the
projector.
Auto Power On
Direct Power On
Allows the projector to turn on automatically once power is fed through
the power cord.
CEC
This projector supports CEC (Consumer Electronics Control) function for
synchronized power on/o operation via HDMI connection. That is, if a
device that also supports CEC function is connected to the HDMI input of
the projector, when the projector’s power is turned o, the power of the
connected device will also be turned o automatically. When the power
of the connected device is turned on, the projector’s power will be turned
on automatically.
NOTE:
• In order to work properly, make sure that the device is correctly
connected to the HDMI input of the projector via an HDMI cable,
and its CEC function is turned on.
• Depending on the device, the CEC function may not work.
Power On Ring Tone
Enable or disable the power on ring tone.
To Next Page
Loading...
