95
Maintenance
General Precautions
• Make sure the projector is turned o and the power cable is unplugged from the power outlet.
• Never remove any parts from the projector. Contact Customer Support when any part of the projector needs replacing.
• Never spray or pour any liquid directly onto the case.
• Handle the projector with care, as a darker-colored projector, if scued, may show marks more clearly than a lighter-colored projector.
Cleaning the Lens
• Use a canister of compressed air to remove dust.
• If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the surface.
CAUTION: Never rub the lens with abrasive materials.
Storing the Projector
If you intend to store the projector for an extended period of time:
• Ensure the temperature and humidity of the storage area are within the recommend range.
• Retract the adjuster foot completely.
• Remove the batteries from the remote control.
• Pack the projector in its original packaging or equivalent.
Disclaimer
• It is not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been
reported to damage the lens and/or case of the projector.
• NOMVDIC™ will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
To Next Page
Loading...
