70
Firmware Upgrade
Users can update the firmware Online, or by USB, and check the version number.
NOTE: Do not unplug the power cord, USB, or disconnect from the Internet during the upgrading process.
1. Before entering the Firmware Upgrade menu, ensure the projector is connected to the Internet.
2. To enter the menu, go to: Home > Settings > Firmware Upgrade.
Settings/Firmware Upgrade
Software Upgrade
Version
Software Update Online
Software Update By USB
OTA Reminder
Firmware Upgrade
V0.2Software Version
3. Use the Up ( )/Down ( ) buttons to select the desired option and press OK ( ), or use the Left ( )/Right ( ) buttons to
make adjustments or selections.
4. To return to a previous menu press the Return (
) button.
To Next Page
Loading...
