72
Menu Description
Software Update by USB
To update by USB:
1. Download the latest Firmware version from the NOMVDIC website
and copy the file to a USB device.
2. Plug the USB device into the USB A port on the projector, then go to:
Home > Settings > Firmware Upgrade > Software Update by USB.
3. Select Enter by pressing OK (
) on the remote control.
4. The system will detect the Firmware version and display a dialog
message.
5. By selecting Yes, a progress bar will appear as the update process
begins.
6. Upon reaching 100%, the projector will restart. The whole process will
take about 10 minutes.
7. After updating the Firmware, it will take a few minutes to restart the
projector.
NOTE: The USB device should be FAT32 format.
OTA Reminder
Selecting Enable ensures the Internet-connected projector will display a
reminder when there is a newer software version available online.
Firmware Version
Displays the currently installed software version.
To Next Page
Loading...
