Nomadic X300 - Connecting to Audio; Bluetooth Speaker

26
Connecting to Audio
Bluetooth Speaker
The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback.
To connect and pair your device:
1. Go to: Home > Bluetooth.
2. Use the Left and Right directional buttons on the remote control to select Bluetooth Speaker or Bluetooth Pairing. Then
press OK on the remote control.
3. A sound eect will be audible upon entering pairing mode.
4. Upon successful connection, another sound eect will be audible.
NOTE:
• Once paired, if both the projector and your device are powered on they will automatically connect via Bluetooth.
• The projector’s name will be labeled as “NOMVDIC X300”.
• To connect the X300 with a paired smart device, select “X300” from the smart device’s Bluetooth settings to connect again each
time.