• Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide and third blade are provided for your safety. If the
plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into
the outlet.
• When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure
grounding prongs are NEVER REMOVED.
• Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the
point where it emerges from the projector.
• In some countries, the voltage is NOT stable. This projector is designed to operate safely within
a voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur.
In areas where voltage may fluctuate or cut out, it is recommended that you connect your
projector through a power stabilizer, surge protector, or uninterruptable power supply (UPS).
• If smoke, an abnormal noise, or a strange odor is present, immediately switch the projector o
and contact your dealer or NOMVDIC™. It is dangerous to continue using the projector.
• Use only attachments/accessories specified by the manufacturer.
• Disconnect the power cord from the AC outlet if the projector is not being used for a long period
of time.
• Refer all servicing to qualified service personnel.
CAUTION: Possibly hazardous optical radiation is emitted from this product. As with any
bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
To Next Page
Loading...
