66
Menu Description
Light Source Level
Select the suitable power consumption of the LED.
Full
100%
Eco
70%
Battery Saving
40%
NOTE: If using a USB-C connected power bank or the built-in
battery to charge the X300, the light source level will only
have Eco and Battery Saving options.
High Altitude Mode
It is recommended that you use High Altitude Mode when your
environment is between 1,500-3,000 m above sea level, and a
temperature between 5°C-25°C.
NOTE: If you use this projector under other extreme conditions
excluding the above, it may display auto shut-down
symptoms, which is designed to protect your projector from
over-heating. In cases like this, you should switch to High
Altitude Mode to solve these symptoms. However, this is not
to state that this projector can operate under any and all
harsh or extreme conditions.
Reset Settings
Reset the settings to default.
NOTE: Language, High Altitude Mode, Projector Position, Network
Settings, All installed Apps in the Apps Center, Add App,
Bluetooth, H/V Keystone, 4 Corner Adjustment, and Light
Source Hours will remain unchanged.
To Next Page
Loading...
