ACCESS GATEWAY
88 System Administration
enter the key in the Change Transaction Key box, then re-enter the key in the Verify
Transaction Key
box.
13. Enable or disable Smart Client Support, as required.
14. You can assign a session idle timeout parameter for subscribers (see following note). To
assign an idle timeout, simply enter a numeric value (in seconds) in the Subscriber Idle
Timeout
box (the default is 1200).
15. If you enabled or disabled SSL Support on this screen, you must reboot the Access
Gateway. You can reboot the system by selection
System>Reboot in the Web
Management Interface.
16. Click on the Submit button to save your changes, or click on the Reset button if you want
to reset all the values to their previous state.
Enabling AAA Services with an External Web Server
You are here because you want to enable the AAA Services with an External Web Server
(EWS). In the EWS mode, the Access Gateway redirects the subscriber’s login request to an
external server.
1. Select the External Web Server tab.
The SIM Compliant option refers to Authorize.net's Simple Integration Method.
Subscriber Idle Timeout does not apply to RADIUS and Post Pay PMS
subscribers.
To Next Page
Loading...
