5
2. QUICK SETUP
1. Check accessories
Please check the giftbox for completeness of accessories. Included should be:
Receiver, Remote Control, User Manual, 2 Batteries, and power adapter.
2. Connect the Receiver to the TV Set
Connect your Receiver with your TV Set. Details can be found in the User
Manual under chapter 4. How to connect your receiver.
3. Connect the Receiver with the Antenna
Connect your Receiver with your Antenna. Details can be found in the User
Manual under chapter 4. How to connect your receiver.
4. Switch on the Receiver and TV Set
Switch on the AC-Power Switch on the rear side of the Receiver and then
press the Standby button in the Front of the Receiver (see User Manual for
more details: Chapter 5.2 Front Panel and 5.3 Rear Panel)
5. Insert the Batteries
Insert the Batteries into the battery case on the underside of the Remote
Control. Please make sure that the Battery + and - Poles are correctly aligned.
Information about changes to the channel list please see chapter 8. Edit
Channels in the User’s Manual.
Under chapter 5.1 you can make yourself familiar with the functions of your
remote control
Under chapter 6 the TV as well as Recording and Playback-Functions of your
receiver are described
To Next Page
Loading...