2
2 OPERATOR SAFETY
DANGER
Always ensure that the UC4+ Spray Height Control
system is powered down or in MANUAL mode:
• Before leaving the operator’s seat
• While the machine is not moving
• When transporting the machine
Under no circumstances should any service work be
performed on the machinery while the UC4+ Spray
Height Control system is in the AUTOMATIC mode.
Before working on any part of the booms:
• Set the UC4+ System to MANUAL mode
• Turn the sprayer engine off
Do not operate this system before:
• Reading and understanding the Operators Manual
• Thoroughly understanding your machine operation
The UC4+ Spray Height Control system will greatly
improve your spraying height accuracy and protect the
boom against damage in a wide variety of field conditions.
However, under some circumstances performance may be
limited. The OPERATOR of the sprayer must remain
ALERT at all times and override the automatic control
when necessary. Refer to the warranty statement in
Section 10 for more details.
To Next Page
Loading...
