1. Notes
-4- B1000 www.nord.com
1. Notes
1.1 General information
Read the Operating Manual carefully prior to performing any work on or putting the gear unit into
operation. Strict compliance with the instructions in this Operating Manual is essential.
Getriebebau NORD accepts no liability for damage to persons, materials or assets as a result of
the non-observance of this Operating Manual, operating errors or incorrect use. General wearing
parts, e.g. radial seals are excluded from the warranty.
If geared motors are used, compliance with the Motor Operating Manual is also necessary.
If you do not understand the contents of this Operating Manual, please consult Getriebebau
NORD!
1.2 Safety and information symbols
Please always observe the following safety and information symbols!
Danger!
Risk of fatalities and injury
Attention!
Machine may be damaged
Note!
Useful information
1.3 Correct use
These gear units generate a rotational movement and are intended for use in commercial
systems. Operation of the system is prohibited until the final product complies with the
regulations of the EU Machinery Directive 98/37.
A manufacturer’s declaration regarding the Machinery Directive is available on request.
Danger!
Use in explosion hazard areas is prohibited.
Strict compliance with the technical data on the rating plate is essential.
The documentation must be observed.
Appropriate safety measures must be taken for applications where failure of a gear unit or
geared motor may result in injury.
To Next Page
Loading...
Need help?
General
