1. Notes
-6- B1000 www.nord.com
1.5 Other documents
Further information may be obtained from the following documents:
- Gear unit catalogues (G1000, G2000, G1011, G1012, G1034, G1035)
- Operating and maintenance instructions for the electric motor
- Operating instructions for attached options, if applicable
1.6 Disposal
Observe the current local regulations. In particular, lubricants must be collected and disposed of
correctly.
Gear unit components: Material:
Toothed wheels, shafts, rolling bearings, parallel keys,
locking rings, …
Steel
Gear unit housing, housing components, … Grey cast iron
Light alloy gear unit housing, light alloy gear unit
housing components, …
Aluminium
Worm gears, bushes, ... Bronze
Radial seals, sealing caps, rubber components,… Elastomers with steel
Coupling components Plastic with steel
Flat seals Asbestos-free sealing material
Gear oil Additive mineral oil
Synthetic gear oil (rating plate code: CLP PG) Polyglycol-based lubricants
Cooling spiral, embedding material of the cooling spiral,
screw fittings
Copper, epoxy, yellow brass
To Next Page
Loading...
Need help?
General
