2 Migration
MI 0500 en-2922 11
2 Migration
Pos: 27 /Allgemein/Dokumenten Überschriften/MI/!Abschnitt NORDAC PRO @ 39\mod_1571734525939_388.docx @ 2567450 @ 2 @ 1
2.1 NORDAC PRO
Pos: 28 /M ig rati onsl eit fa den/N OR DAC PR O/SK 5 xxE - SK 5xxP /Mig ratio n/NORD AC PR O @ 82\mod_1636973596815_388.docx @ 2844210 @ @ 1
This guide serves the migration of drive electronics of the NORDAC PRO product family. The products
for the SK 5xxE control cabinet frequency inverters are compared to those of the new SK 5xxP series.
The following products, fields and topics will be considered for the migration:
• Device types and sizes
• Device functions and device characteristics
• Field bus systems and bus interfaces
• Hardware ports and interfaces
• Control and parametrisation options
• Software and options
• Accessory components
Both series basically have the same structure. Structure, performance and range of functions of the
new SK 5xxP frequency inverters have been essentially enhanced. For market launch in March 2020,
the new NORDAC PRO of type SK 5xxP was sold in sizes 1 – 3, i.e. for motors with nominal powers
of 0.25 kW – 5.5 kW. From mid-2022, the devices of sizes 4+5, i.e. for motors with nominal powers
7.5 kW – 22.0 kW, will be available. All device sizes are available with different performance levels
(configuration levels).
The 1 ~ 230 V and 3 ~ 400 V frequency inverter types of the most common device or configuration
versions are compared. In the following, only those functions and solutions will be considered that
could also be implemented through the SK 5xxE. The detailed description of available options and
features only considers the most common ones.
SK 5xxE series SK 5xxP series
Illustration 1: System overview of NORDAC PRO products
The NORDAC PRO MI 0500 migration guide compares the optional accessory components for both
series.
Pos: 29 /A llg em ein/ Allg em eing ülti ge M od ule/ ---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
