Nord Drivesystems NORDAC PRO - 4 Commissioning; 4.1 Factory settings

NORDAC PRO – Migration guideline SK 5xxE to SK 5xxP
62 MI 0500 en-2922
Information
Note the details on the description of the connections in the BU 0500 or BU 0505 manual  5.1.1
"Manuals".
Pos: 10 5 /Mig ratio nsleit faden /NORD AC PRO /SK 5 xxE - SK 5xx P/Ele ktrisc her Ans chlus s/!A bsch nitt Ger äterei he SK 5 xxP @ 42\mod_1588854524093_388.docx @ 2606627 @ 2 @ 1
3.2 SK 5xxP series
Pos: 10 6 /Migrationsleitfaden/NORDAC PRO/SK 5xxE - SK 5xxP/Elektri scher Anschluss/Übersich t Klem menblöcke [SK 5xxP] @ 42\mod_1588853824001_388.doc x @ 2606553 @ 3 @ 1
3.2.1 Overview SK 5xxP terminal blocks
Depending on the size of the frequency inverter, the connection terminals for the supply cables and
the control cables are located in different positions. According to the configuration of the frequency
inverter, various terminals are not present.
View from top
View from below
Front view
Note for X17/X19: The illustration shows the X17 Ethernet connection.