Nord Drivesystems NORDAC PRO - Field Bus Files; S7 Modules; TIA Portal

5 Additional information
MI 0500 en-2922 91
Pos: 17 6 /Allg emein/ Dok ument en Übers chrif ten/M I/!A bsch nitt Fel dbus Dat eien @ 40 \mod_1579789344801_388.docx @ 2586680 @ 3 @ 1
5.2.4 Field bus files
Pos: 17 7 /Anlei tung en/El ektr onik/Zu satz infor matio nen/N eue Ver sion/F eldb us Dat eien @ 83 \mod_1641819644023_388.docx @ 2854936 @ @ 1
For plan
ning and programming the different field bus systems and bus
interfaces, several software files for integration into different
automation systems are available for download for the NORDAC PRO
device series at www.nord.com.
The NORDAC options comprise the manufacturer and device-
specific
information and parameters required for connecting the NORD
products’ bus system-
specific field bus systems and bus interfaces to
the respective used bus system.
For further information, please refer to the link listed below or to the assigned “readme” text files on
the homepage.
Software Description Version
Field bus
files
NORDAC field bus files are software files that are assigned to bus systems (such
as PROFIBUS DP
®
– GSD, CANopen
®
– EDS, EtherCAT
®
–
XML, etc.) and
provided for planning system-
specific automation projects with frequency
inverters from Getriebebau NORD GmbH & Co. KG.
The software files are assigned to the available field bus systems of the different
NORDAC device series.
The implemen
tation of the software files is done via integration into the control or
automation software of the respective bus system manufacturer.
Depends on
the software
and system
Pos: 17 8 /Allg emein/ Dok ument en Übers chrif ten/M I/!A bsch nitt S7-B aus tei ne @ 84\mod_1642077188236_388.doc x @ 2855839 @ 3 @ 1
5.2.5 S7 modules
Pos: 17 9 /Mig ratio nsleit faden /allge meing ültig e Modul e/Z usatzin form ation en/NOR D S7 St andar dbaust eine @ 8 4\mod_1642081714052_388.docx @ 2856063 @ @ 1
For PLC controls from SIEMENS, standardised S7 modules are available for planning and migration of
the NORDAC product components. These manufacturer-specific modules can be imported into the
Simatic hardware configurator.
For support, NORD provides modules that contain the relevant information for the device series.
An overview of the available S7 modules can be found on our homepage at Software:
NORD S7 standard modules
Pos: 180 /All ge mein/ Do ku ment en Ü bers chr ift en/M I/! Absc h nitt T IA Por tal @ 8 4\mod_1642076992096_388.docx @ 2855801 @ 3 @ 1
5.2.6 TIA portal
Pos: 18 1 /Mig ratio nsleit faden /allge meing ültig e Modul e/Z usatzin form ation en/NOR D TIA S tandar dba ustein e @ 84\mod_1642081029655_388.docx @ 2856026 @ @ 1
For PLC controls from SIEMENS, standardised modules are available for planning and migration of
the NORDAC product components. These manufacturer-specific modules can be imported into the
TIA planning tool.
For support, NORD provides a library that contains the relevant information for the device series.
An overview of the available modules can be found on our homepage under Software:
NORD TIA standard modules
Pos: 18 2 /Allg emein/ Dok ument en Übers chrif ten/M I/!A bsch nitt NORD SISTEM A - Biobliotheken @ 84\mod_1642077394634_38 8.docx @ 285587 7 @ 3 @