Nord Drivesystems NORDAC PRO - Ethernet-Based Bus Interfaces; Table 10: Technology Units SK TU3

NORDAC PRO – Migration guideline SK 5xxE to SK 5xxP
24 MI 0500 en-2922
Information
For detailed information, please refer to the  5.1.1 "Manuals" supplementary manuals on the field
bus interface.
Pos: 56 /M ig rati onsl eit fa den/N ORD AC PR O/ SK 5 xxE - SK 5 xxP /Mig rati on/ Et herne t basi ert e Bus sch nitt st elle n (S K TU 3-.. .) @ 39\mod_1571913134747_388.docx @ 2568420 @ 3 @ 1
2.4.2 Ethernet-based bus interfaces
Only the frequency inverter of the SK 550P device version is equipped with an integrated bus interface
for the connection of the Ethernet-based field bus systems:
SK 5xxE
Bus system
Connection
SK 550P
Designation
Part No.
Product Product
Designation
Part No.
SK TU3-ECT
2 x RJ45
24 V DC
on board
275 900 180
275 295 xxx
SK TU3-EIP
2 x RJ45
24 V DC
on board
275 900 150
275 295 xxx
SK TU3-POL
2 x RJ45
24 V DC
on board
275 900 140
275 295 xxx
SK TU3-PNT
2 x RJ45
24 V DC
on board
275 900 190
275 295 xxx
Table 10: Technology units SK TU3-… Ethernet-based bus interfaces
Information
For the SK 550P, the field bus protocol to be used is selected via the dialect’s function setting in the
Changing the bus protocol parameter.
For detailed information, please refer to the  5.1.1 "Manuals" supplementary manuals on the bus
interface.
Pos: 57 /A llg em ein/ Allg em eing ülti ge M od ule/ ---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1