Rotor Pedal Mode
If you are using a sustain pedal connected to control Rotor Speed
this allows you to set how this should operate. “Hold” means that the
Rotor Speed is fast for as long as the pedal is down and reverts back
to slow/stopped when the pedal is released (or vice versa depending
on the set pedal polarity).
“Toggle” means that the fast & slow/stopped rotor speed is cycled
each time you activate the pedal, like an on/off switch pedal.
Range: Hold, (default), Toggle.
MIDI Control Local
This allows you to set if the Nord C2D keyboard and front panel con-
trols should control internal Programs or only send note and controller
messages via MIDI. Local On is the normal “mode”. In Local Off mode,
the front panel and keyboard action are transmitted via MIDI only and
does not control the internal sound(s) directly.
If the “E” mode is active, the keyboard of the C2D will transmit velocity.
Range: On (default), Off, Ext
M Local defaults back to mode On every time the Nord C2D is
powered on.
MIDI Upper Channel
This sets the MIDI Channel that the upper/swell manual on the Nord
C2D transmits and responds to.
Range: Off, 1-16 (default = 1)
MIDI Lower Channel
This sets the MIDI channel that the lower/great manual on the Nord
C2D transmits and responds to.
Range: Off, 1-16, (default = 2)
MIDI Pedal Channel
This sets the MIDI channel that the Bass section of the Nord C2D
organ transmits (if the Great manual is split) and responds to.
Range: Off, 1-16, (default = 3)
MIDI Control Change Mode
This setting specifies how the front panel’s knobs and buttons are
handled in the MIDI communication with MIDI Control Change mes-
sages. You can select if the panel controls and functions should either
send (Snd) or receive (Rcv), or both or if Control Change messages
should be ignored.
Range: Snd & Rcv (default), Receive, Send, Off
MIDI Prog Change Mode
This setting specifies how the Nord C2D should handle MIDI Program
Change messages.
Range: Snd & Rcv (default), Receive, Send, Off
MIDI Send CC
You can perform a dump of all the active Program’s parameters as
MIDI Control Change messages. Press the Store button to perform the
dump.
M Only settings in a selected preset will be transmitted.
MIDI Dump One
This allows you to perform a MIDI SysEx dump of the currently selected
Program. Press the Store button to perform the dump.
MIDI Dump All
This allows you to perform a MIDI SysEx dump of all the Programs in
the Nord C2D. Press the Store button to perform the dump.
In the MIDI chapter on page 23 is a description on how the Nord C2D
receives a Sys Ex dump.
Sound Menu
B3 Tonewheel Mode
Sets the level of tonewheel crosstalk and cable leakage artifacts of the
B3 organ model.
M The default Vintage 3 mode will create noises from the B3 model
even if you don’t play any keys.
Range: Clean, Vintage 1, Vintage 2, Vintage 3 (default)
B3 Key Click Level
This sets the level of the Key Click for B3 organ model.
Range: Low, Normal (default), High, Higher
B3 Key Bounce
This turns on or off the Key Bounce feature. When this is on, the key off
click can be accentuated if the key is released quickly.
Range: On (default), Off
20 | Nord C2d User MaNUal os v1.X
To Next Page
Loading...
Need help?
General
