To Next Page

To Previous Page

B3 Perc DB9 Mute

If this is set to On, the 9th drawbar will be muted when the percussion

is activated, to mimic the behavior of an original organ.

Range: On, Off (default).

B3 Perc Decay Fast

Sets the fast mode decay time of the B3 percussion effect.

Range: Long, Medium (default), Short

B3 Perc Decay Slow

Sets the slow mode decay time of the B3 percussion effect.

Range: Long, Medium (default), Short

B3 Perc Level Norm

Sets the level of the percussion effect in the normal setting.

Range: High, Medium (default), Low

B3 Perc Level Soft

Sets the level of the percussion effect in the soft setting.

Range: High, Medium (default), Low

Rotary Speaker Type

There are two different rotary models available, one of these has two

separate microphone positions. The 122 is modeled with the micro-

phones placed traditionally a bit away from the speaker. The 122 Close

have the microphones placed closer to the cabinet. The 145 is mod-

eled on a vintage 145 with a traditional microphone position.

Range: 122 (default), 122 Close, 145

Rotary Balance Bass/Horn

This parameter allows you to adjust the balance between the two

separate microphone setups for the bass rotor and treble horn.

Range: 70/30, 60/40, Medium (default), 40/60, 30/70

Rotary Horn Speed

Sets the speed setting (in the fast and slow speed modes) of the rotary

speaker simulation’s treble horn.