EasyManuals Logo

nord C2D User Manual

nord C2D
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Program and CC dumps
To dump a Program SysEx, or MIDI Controller data via MIDI, either to
another Nord C2D or for recording the data into another MIDI device,
proceed as follows:
Sending program dumps
1 Connect the MIDI OUT on the Nord C2D to the MIDI In on the
receiving device.
2 Set up the receiving device to accept MIDI SysEx and MIDI Con-
troller data.
3 Press Shift + System and select the “Dump One” or “Dump All”
menu item using the Up/Down buttons.
4 If needed, set the receiving MIDI device to “recording mode”.
5 Press the Store button to send the dump to the MIDI Out of Nord
C2D. The two asterisks ( ** ) in the display will change to hyphens
( - - ) once the dump has been transmitted.
Sending MIDI Controller dumps
1 Set up as in steps 1 and 2 in the preceding description.
2 Press Shift + MIDI and select the ‘Send CC” menu item using the
Up/Down buttons.
3 Press the Store button to send the dump to the MIDI Out of Nord
C2D. The two asterisks ( ** ) in the display will change to hyphens
( - - ) once the dump has been transmitted.
This will send a snapshot of the current, active panel settings as CC
values.
Receive MIDI SysEx dumps
Here is how to receive a MIDI SysEx Dump:
1 Connect the MIDI Out on the transmitting device to the MIDI IN on
the Nord C2D.
2 Initiate the transmission on the transmitting device.
If the dump contained all Programs (All), it will replace all programs
currently stored in the Nord C2D. If the dump contained only a single
program, it will be temporarily placed in the currently selected program
memory location. An asterisk (*) will appear to the right of the program
number to indicate an unsaved edit. You will then have to store the
program manually to a memory location using the Store function.
MIDI Controller list
This is a list of the MIDI Controller numbers used for all knobs and
buttons on the front panel and the pedals. When a function is available
for both the Swell. Bass and/or Great manuals (on their respective MIDI
channels) this is indicated with an asterisk *.
Nord C2D Parameter MIDI Controller
Organ Model Selector 9
Synth Bass On/Off 110
Speaker Sel 81
Delay Tempo 77
Delay Feedback 78
Delay Swell Only 75
Delay Amount 76
Delay On/Off 80
EQ Treble 113
EQ Mid 116
EQ Bass 114
EQ On/Off 115
Drive Amount 111
Drive On/Off 112
Reverb Amount 102
Reverb Selection 96
Reverb On/Off 97
Vib/Chorus/Trem Mode 84
Vib On/Off (SW/GR) * 85
Drawbar/Presets * 3
Ped Great Man 117
Rotary Speaker Control 82 (0 = Slow, 64 = Stop. 127 = Fast)
Ped/GR Low coupler 103
SW 16/GR - SW/GR 104
Drawbars -
Sep. for Swell, Bass and Great MIDI CH
Drawbar A1 * 16
Drawbar A2 * 17
Drawbar A3 * 18
Drawbar A4 * 19
Drawbar A5 * 20
Drawbar A6 * 21
Drawbar A7 * 22
Drawbar A8 * 23
Drawbar A9 * 24
Drawbar B1 * 36
Drawbar B2 * 37
Drawbar B3 * 38
Drawbar B4 * 39
Drawbar B5 * 40
Drawbar B6 * 41
Drawbar B7 * 42
Drawbar B8 * 43
Drawbar B9 * 44
Perc On/Off 87
Perc Soft 28
Perc Fast 27
Perc Third 95
Swell 16 & 4 coupler 105
Swell/Ped & Gr/Ped coupler 106
Sustain Pedal 64
Swell Pedal 4
Rotary Control 82 (same as panel)
Chapter 7 Midi fUNCtioNs | 23

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the nord C2D and is the answer not in the manual?

nord C2D Specifications

General IconGeneral
Brandnord
ModelC2D
CategoryMusical Instrument
LanguageEnglish

Related product manuals