SK 54xE – Users Manual for Frequency Inverters   
18    BU 0505 EN-3021 
Software (Free download) 
NORD CON 
MS Windows ® - based 
software 
 
For commissioning, parametrisation and control 
of the device. 
Refer to 
www.nord.com 
NORD CON 
ePlan macros 
 
Macros for producing electrical circuit diagrams 
Refer to www.nord.com 
ePlan 
Device master data 
Device master data / device description files for 
NORD field bus options 
NORD fieldbus files 
S7 standard modules for 
PROFIBUS DP and 
PROFINET IO 
 
Standard modules for NORD frequency 
converters 
Refer to 
www.nord.com 
NORD S7_files 
Standard modules for the TIA 
portal for PROFIBUS DP and 
PROFINET IO 
 
Standard modules for NORD frequency 
converters 
In preparation 
 
Pos: 26 /Anleitungen/ Elektronik/FU und St arter/1. Allgemeines/ Sicherheits- und I nstallationshinwei se/Sicherheits- und I nstallationshin weise (inkl. Einleitu ng) @ 0\mod_132578042820 7_388.docx @ 5385 @ 2 @ 1 
 
1.5  Safety and installation notes 
The devices are operating materials intended for use in industrial high voltage systems, and are 
operated at voltages that could lead to severe injuries or death if they are touched. 
The device and its accessories must only be used for the purpose which is intended by the 
manufacturer. Unauthorised modifications and the use of spare parts and additional equipment which 
has not been purchased from or recommended by the manufacturer of the device may cause fire, 
electric shock and injury. 
All of the associated covers and protective devices must be used. 
Installation and other work may only be carried out by qualified electricians with strict adherence to the 
operating instructions. Therefore keep these Operating Instructions at hand, together with all 
supplementary instructions for any options which are used, and give them to each user. 
Local regulations for the installation of electrical equipment and accident prevention must be complied 
with. 
Pos: 27 /Anleitungen/ Elektronik/FU und St arter/1. Allgemeines/ Sicherheits- und I nstallationshinwei se/Erläuterung der  verwendeten Kennze ichnungen @ 1\mod_1341559156 309_388.docx @ 30301 @ 3 @ 1