SK 54xE – Users Manual for Frequency Inverters
76 BU 0505 EN-3021
Function
Cable colours, for Hiperface
encoders
Connections for SK 54xE
Terminal block X5, X6 or X14
7-12V supply red
49 VO 12V
0V supply blue
40 GND/0V
+ SIN white
51 ENC A+
REFSIN brown
52 ENC A-
+COS pink
53 ENC B+
REFCOS black
54 ENC B-
Data + (RS485) grey or yellow
65 DAT +
Data - (RS485) green or violet
66 DAT-
Cable shield connected to a large area of the frequency inverter housing or shielding angle
Table 27: Colour and contact assignment for Hiperface encoders
Note
Rotary encoder function test
The voltage difference between the SIN and COS tracks can be measured with the aid of parameter P709 [-09]
and [-10]. If the Hiperface encoder is rotated, the voltage difference should range between approx. -0.5V and
0.5V.
Pos: 105 /Anleitungen/ Elektronik/F U und Starter/2. Montage und Ins tallation/Zubehör /2.12 RJ45 WAGO- Anschl ussmodul [Allg.] @ 0\ mod_1325866182423_388. docx @ 6170 @ 2 @ 1
2.11 RJ45 WAGO- Connection module
This adapter module can be used for the simpl
functions of the RJ45 connection (24V supply voltage, CANopen
absolute encoder, CANbus) with normal cables.
Pre-assembled RJ45 patch cables are connected to the spring-
loaded terminals (1-8 + S) with this adapter.
The shield clamp should be used in order to ensure the correct
connection and relief of tension on the shield.
Supplier Name Article number
WAGO Kontakttechnik GmbH Ethernet
connection module with CAGE CLAMP
connection
RJ45 transfer module
289-175
WAGO Kontakttechnik GmbH Accessories: WAGO shield clamp 790-108
Alternative, complete connection module and shield clamp Part No.
Co.KG
Adapter module RJ45/terminal
278910300
Table 28: RJ45 WAGO connection module
Pos: 106 /Anleitungen/ Elektronik/F U und Starter/3. Anzeige, Bedi enung und Optionen/SK 5 xxE/3. Anzeige und Bedienun g @ 0\mod_1327492711496 _388.docx @ 6260 @ 1 @ 1
To Next Page
Loading...
