NORDAC SK 5xxE Manual
70 Subject to technical alterations BU 0500 GB
Parameter Set value / Description / Note
Device Supervisor
Parameter
set
P002 Display factor
S
0.01 ... 999.99
[ 1.00 ]
The selected operating value in parameter P001 >Select of display< is multiplied with the scaling
factor in P000 and displayed in >Operating parameter display<.
It is therefore possible to display system-specific operating such as e.g. the throughput quantity
P003 Supervisor code
0 ... 9999
[ 1 ]
0 = The Supervisor parameters are not visible.
1 = All parameters are visible.
2 = Only the menu group 0 > Operating display< (P001 … P003) is visible.
3 = ... 9999, as for adjustment value 2.
To Next Page
Loading...
