NordicTrack C2 Si - Page 6

6
1.
I
dentify the Front Stabilizer (2), which has
Wheels (17) attached.
Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 85mm Patch Screws (56) and
two M10 Curved Washers (10).
2. Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 85mm Patch Screws (56) and
two M10 Curved Washers (10).
1
56
3
To make assembly easier, read the
information on page 5 before you begin
a
ssembling the exercise cycle.
56
1
2
1
10
10
10
17
2