To Next Page
J
Johnny WatersJul 30, 2025
What to do if the pedals slip on my NordicTrack E4.0 Elliptical?
- AandreathomasJul 30, 2025
If the pedals slip on your NordicTrack Elliptical Trainer even at the highest resistance, you may need to adjust the drive belt. To do this, you must remove the left pedal, the top shield cover, and the rear shield cover. Unplug the power adapter first. Follow the instructions to remove these parts, then loosen the Pivot Screw. Tighten the Drive Belt Adjustment Screw until the Drive Belt is tight, then tighten the Pivot Screw. Finally, reattach the left shield, rear shield cover, top shield cover, and the left pedal. Plug the power adapter back in.
General
