8
3. Identify the Left Upright (84), which is marked
“Left.” Have a second person hold the Left
Upright near the Base (29).
See the inset drawing. Tie the wire tie in the
Left Upright (84) securely around the end of the
Upright Wire (91). Then, insert the Upright Wire
into the lower end of the Left Upright as you pull
the other end of the wire tie through the Left
Upright.
3
84
84
Wire
Tie
91
Wire
Tie
4. With the help of a second person, hold the Left
Upright (84) against the Base (29). Be care-
ful not to pinch the wires. Partially tighten
three 3/8" x 4" Screws (3) with three 3/8" Star
Washers (10) into the Left Upright and the Base;
do not fully tighten the Screws yet.
84
4
3
10
29
Wires
91
29
To Next Page
Loading...
Need help?
General
