.
6
Remove the tie from the 5/16" Cage Nut (90). If
necessary, press the Cage Nut back into place.
Attach the Right Handrail (72) to the Right
Upright (76) with a 5/16" x 1" Bolt (7), a 5/16"
Star Washer (8), and two 5/16" x 1" Flat Head
Screws (10) as shown. Start the Bolt and
Screws, but do not tighten them yet.
Remove and discard the two Screws (B).
10
B
72
.
Set the Console Base (83) face down on a soft
surface to avoid scratching the Console Base.
Remove the two Screws (C) from the Pulse
Crossbar (31). Remove the Pulse Crossbar.
Discard the Screws.
31
83
.
Remove the four 1/4" x 1" Screws (9) from the
Console Frame (87). The Screws will be used
in step 9.
87
9
10
To Next Page
Loading...
