13
15. Identify the Right Pedal (21).
Using an adjustable wrench, firmly tighten the
Right Pedal (21) clockwise into the Right Crank
Arm (23).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
Adjust the strap on the Right Pedal (21) to the
desired position, and press the end of the strap
onto the tab on the Right Pedal. Adjust the
strap on the Left Pedal (not shown) in the
same way.
15
23
21
53
54
54
16
16. Attach the Tablet Holder (53) to the Console (4)
with four Tablet Holder Screws (54); start all the
Tablet Holder Screws, and then tighten them.
4
To Next Page
Loading...
