Nordson 3500V Series - Page 149

A 4-12 Operation
5. Procedure
for Changing
Adhesives
@ontd)
4
103998
Fig. A 4-3 Methods
of
Draining
the Unit
1. Draining
through the
gun
2. Draining
through the manifold
(typical
manifold
shown)
3.
Draining
through
the hose
4. lf
you
have
not already done so,
disconnect each hose in
the system
from its
gun.
5. Clean each automatic
gun
and hand-operated
gun
as needed. Refer
to the
gun
manualfor information
on
gun
disassembly,
cleaning, and
rebuilding.
6.
Flush
the system with the flushing
material recommended
by
your
adhesive supplier. Refer
to the
procedure
To Flush
the System with
a
Flushing
Materialor the
procedure
To Flush
the System with
Type R
.
Fluidinlhe
Maintenance section of
this
manual.
A4EN-06-[3V-A-AAXV]-1
41-3000v
lssued
5/00
@000
Nordson Corporation
All rights reserved