Safety
A 1-5
6. Operation
@ontd.)
a
ln
a humid environment, only equipment featuring
a
corresponding
class of
protection
may be operated.
Do
not operate the unit in an explosive environment.
Keep
parts
of the body or clothing away from rotating
parts.
Do not
wear loose
articles of clothing when operating
or seruicing
units with
rotating
parts.
Take
off
wrist watches, rings,
necklaces, or similar
pieces
of
jewelry
and
pin
up or cover long hair before
performing
any
work on or with
the
unit.
To carry out measurements on work
pieces,
switch
off
the
unit and
wait until it comes to a standstill.
Never
point
hand
guns
or applicator nozzles
at
yourself
or
other
persons.
WARNING: An operator
or seruice technician
working
with the
unit should be aware of less-obvious
dangers that often cannot
be completely minimized
at
production
sites:
Exposed
surfaces of the unit which cannot be
practically
safeguarded. They may be hot
and take
time
to cool after the unit
has
been operating.
The
possibility
that electrical
potentials
may remain in the unit
after
the unit was de-energized
Hot melt material
and
vapors
a
Hydraulically or
pneumatically
operated
parts
of the unit
a
Parts winding something
up or down which are not covered
lf the unit malfunctions,
switch it off immediately.
.
Turn the circuit
breaker or main
power
switch
OFF.
.
Have
the unit repaired by
qualified
personnel
only.
a
a
Less-Obvious Dangers
Action
in the Event of
Unit
Malfunction
a
a
a
a
@ 1994
Nordson Corporation
All rights reserved
lssued 11/94
A1 EN-02-[XX-SAFE]-1
To Next Page
Loading...
