Nordson DuraBlue D10L - Shutting Down the Melter

Melter control switch (on/off)
Operation
4-26
Part 1073401_07
E 2021 Nordson Corporation
Shutting Down the Melter
Shut the melter down when it will not be used for an extended period of time.
To shut the melter down
1. Switch the melter off.
2. Disable the applicators as follows:
S Air‐operated applicators: Turn off the air supply to the applicators.
S Electric applicators: Turn off the applicator driver, pattern controller,
or timer.