Operating Parameters
B-1
Part 1032059B
E 2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Appendix B
Operating Parameters
Operating parameters are organized in this appendix according to the
logical groups listed in Table B-1. For information about selecting and
editing operating parameters, refer to Section 3, Installation, Setting Up the
Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B-1 Parameter Groups
Group Parameters Description
Standard 0 to 11 Frequently used parameters
Temperature Control 20 to 26 Control heater function
Seven-day Clock 50 to 77 Configure the clock feature
PID Selection 80 to 91 Change preset PID settings
To Next Page
Loading...
