Nordson DuraBlue D16L - Introduction

Introduction
2-1
Part 1032059B
E 2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Section 2
Introduction
This manual describes the installation and use of the DuraBlue 4 L (D4L),
DuraBlue 10 L (D10L), and DuraBlue 16 L (D16L) adhesive melters. When
necessary, the reader is referred to the documentation supplied with other
Nordson products or products supplied by third parties.
With the exception of tank capacity, hose/gun capacity, and exterior
appearance, all DuraBlue melters are function identically. To simplify the
presentation of information in this manual, depictions of the model D10L are
used generically throughout this manual to represent all DuraBlue melters.