Encore Manual Spray Gun Upgrade Kit
2
Part 1102654A
E 2010 Nordson Corporation
11
12
9
10
J3
A
J3
J2
A
Figure 1 Removing the Display Module
11. See Figure 2. Pull on the top of the bulkhead (8) to remove it from the
gun. Leave the power supply in the gun body.
12. Remove the M5 x 10 nylon screw (24) from the gun body.
8
24
Figure 2 Removing Bulkhead and Body Screw
13. See Figure 3. Grasp the handle in one hand and the gun body in the
other. Press the thumbs of each hand together while pulling in opposite
directions to separate the gun body from the handle.
14. Remove the elbow (13) from the inlet tube (23).
2313
Figure 3 Removing Bulkhead and Body Screw
To Next Page
Loading...
Need help?
General
