Nordson EP 30 User Manual

10
Hot melt application head EP 30
P/N 397191B
E 2005 Nordson Corporation
EP 30
Setting Adhesive Pressure
The exact pressure must be determined for each application.
Adhesive pressure in
application head
Pump speed in melter Adhesive pressure
Low Increase Increase
High Decrease Decrease
Maximum adhesive pressure
The maximum adhesive pressure may not be exceeded:
70 bar 7 MPa 1015 psi
Nordson will assume no warranty or liability for damage resulting from
incorrect pressure settings.

Nordson EP 30 Specifications

General

Brand	Nordson
Model	EP 30
Category	Melting Machines
Language	English