Description
A 2-9
Part 331235C
E 2003 Nordson Corporation
Part A: System Overview
1400861A
1
3
4
2 5
Figure A 2-5 Main Control Cabinet Components—Front View
Table A 2-5 Main Control Cabinet Components—Front View
Item Component Description
1 System Keyswitch Sets the system to one of three modes for maintenance or
normal operation. Refer to the Operation section in this part of
the manual for a description of the three modes of operation.
2 Gun Driver Cards
(Slots 1−8)
Allow the modular gun control system to interface with the
individual guns and pneumatic modules. Each gun control
card can control up to two guns.
3 Interface Card (Slot 9) Allows the modular gun control system to interface with
optional equipment, such as the purge modules; application or
triggering controller; or remote PLC.
4 Blank Card Slot (Slot 10) Allows the modular gun control system to be upgraded in the
future.
5 Power Supplies Distribute power to system components.
To Next Page
Loading...
