EasyManua.ls Logo

Nordson Sure Coat - System Specifications

Nordson Sure Coat
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description
A 2-13
Part 331235C
E 2003 Nordson Corporation
Part A: System Overview
Specifications
Specifications are subject to change without notice.
Electrical
Main input voltage 85240 Vac, 50/60 Hz
1 , 10 amp (300 VA)
Gun output 621 Vdc
Maximum current 600 mA
Maximum short circuit current 50 mA
ANSI/ISA-S82.01 Pollution Degree 1
Overvoltage Category III
Pneumatic
Operating Air Pressures
Minimum input air pressure 5.6 bar (80 psi)
Maximum input air pressure 7 bar (100 psi)
Typical Air Pressures
Flow rate air 2 bar (30 psi)
Atomizing air 1 bar (15 psi)
Gun air 0.6 bar (10 psi) fixed
Air Supply Quality
Main input air must be clean and dry. Use a regenerative desiccant or
refrigerated air dryer capable of producing a 3.4 _C (38 _F) or lower
dewpoint at 7 bar (100 psi). Install a filter system with prefilters and
coalescent type filters capable of removing oil, water, and dirt in the
submicron range.

Table of Contents

Other manuals for Nordson Sure Coat

Related product manuals