Description
A 2-11
Part 331235C
E 2003 Nordson Corporation
Part A: System Overview
Table A 2-6 Main Control Cabinet Components—Back View
Item Component Description
1 Solenoid Panel Connects the gun driver cards to the pneumatic module
solenoids.
2 AC Power Out
Cable/Feed-Through
Supplies power to the central control unit and optional
application/triggering controller.
3 Application/Triggering
Controller
Cable/Feed-Through
(Optional)
Connects the interface card in the main control cabinet to the
application/triggering controller.
4 Network
Cable/Feed-Through
Connects the network interface cable to the main control
cabinet from the central control unit.
5 Purge Manifold (Optional) Sends pilot air signal to activate the optional gun purge
module.
6 Gun Receptacle Panel Connects individual gun cables to the modular gun control
system.
7 External Equipment
Knockout
Connects optional, external equipment (such as a
customer-supplied PLC or photo eye junction box) to the
modular gun control system.
8 System Power
Cord/Feed-Through
Supplies main ac power for the modular gun control system.
9 Ground Stud Grounds the modular gun control system enclosure and all
components.
10 System Power Switch Turns on and off all connected components.
To Next Page
Loading...
