Nordyne JS6BD Series User Manual

Please read this information thoroughly and become familiar with the capabilities and
use of your appliance before attempting to operate or maintain this unit. Keep this
literature where you have easy access to it in the future. If a problem occurs, check the
instructions and follow recommendations given. If these suggestions don’t eliminate
your problem, call your servicing contractor.
The Installation Instructions are primarily intended to assist qualifi ed individuals
experienced in the proper installation of this appliance. Some local codes require licensed
installation/service personnel for this type of equipment. Please read all instructions
carefully before starting the installation.
DO NOT DESTROY. PLEASE READ CAREFULLY AND
KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
IMPORTANT
SPLIT SYSTEM AIR CONDITIONER
USER’S MANUAL / INSTALLATION INSTRUCTIONS
JS6BD SERIES 13 SEER

Nordyne JS6BD Series Specifications

General

Brand	Nordyne
Model	JS6BD Series
Category	Air Conditioner
Language	English

Summary

USER INFORMATION

Safety and Operation Guidelines

Crucial safety guidelines and details on operating the air conditioner.

Troubleshooting and Maintenance

Steps for resolving common issues and performing routine maintenance.

INSTALLER INFORMATION

Installation Safety and Precautions

Essential safety warnings for installers, refrigerant handling, and unit operation.

Installation Procedures and Connections

Site selection, tubing, electrical wiring, grounding, and thermostat connections.

SYSTEM START-UP AND CHARGING

Pre-Start Checks and Startup

Checklist and procedures for initial system startup and blower operation.

Refrigerant Charging Procedure

Detailed instructions for charging the system with R-410A refrigerant.

TECHNICAL REFERENCE DATA

Unit Specifications and Dimensions

Unit dimensions, electrical data, and component specifications.

Wiring Diagrams

Visual representations of electrical connections for different unit tonnages.

Refrigerant Charging Charts

Graphs to determine correct refrigerant charge based on temperature and pressure.

FINAL VERIFICATION

Installation and Performance Checklist

Checklist to confirm proper installation and initial system performance.