12 OPERATING INSTRUCTIONS
CHOOSE YOUR ATTACHMENT
Select the attachment you are using with the system by tapping on the attachment graphic on the
Home Screen. Tap an attachment to select it, and then tap the Back Button to return to the Home
Screen.
You can quickly identify which attachment is selected by looking at the attachment graphic on the
Home Screen.
ADJUST THE MODE
The current mode is displayed in upper left of the Home Screen.
Adjust the mode by tapping the Mode Button on the Home Screen. The Mode Selection Screen will
open. The active mode will be highlighted in blue. To change the mode, tap on the desired mode.
When complete, tap the Back Button to return to the Home Screen.
Recovery Flush: Use Recovery Flush for a quick recovery session.
Rehab: Use Rehab Mode to select pre-programmed sessions designed for specific applications. When
you select Rehab Mode, you will be prompted with additional options depending on which attachment
you have selected.
Custom: Use Custom Mode to program your own settings. See the Custom Mode section (Page 15) for
details on how to use this mode.
This option can only be adjusted before a session starts.
Time Adjustment ScreenLevel Adjustment ScreenHome Screen
To Next Page
Loading...
Need help?
General
