20 TECHNICAL INFORMATION
Do not attempt to take apart the system.
The system has no user-serviceable parts. There are no user-replaceable fuses.
INTERNAL BATTERY INFORMATION
This device contains a rechargeable lithium ion battery. The battery will provide power for up to two
hours of continuous use. The battery charges when the device is connected to the wall and takes
approximately six hours to fully charge.
This product contains a lithium ion battery. The battery is intended to be changed only by service
personnel.
PULSE PRO DIMENSIONS: 4” (width), 5” (depth), 9” (height); [10.2 cm (width), 12.7 cm (depth), 22.9 cm
(height)]
PULSE PRO WEIGHT: 3.6 lbs [1.63 kg]
PULSE PRO ELECTRICAL REQUIREMENT: 12V DC 1.2A
AC-DC ADAPTER
WARNING!
Only use the AC-DC Adapter Model Number 50-00048 provided with the system.
Using a dierent adapter may cause the system to not operate correctly.
INPUT: 100-240V .6-.8 A 50/60 Hz per NormaTec Model # 50-00048
OUTPUT: 12V DC Minimum 15 Watt per NormaTec Model # 50-00048
TEMPERATURE (OPERATING): +41° F to 104° F [+5° C to +40° C]
TEMPERATURE (STORAGE): -13° F to +158° F [-25° C to +70° C]
RELATIVE HUMIDITY (OPERATING): 15% to 93%, non-condensing
RELATIVE HUMIDITY (STORAGE): -25˚C without relative humidity control; +70˚C at relative humidity
up to 93%, non-condensing
ATMOSPHERIC PRESSURE (STORAGE AND TRANSPORTATION): 190hPa to 1060hPa
ATMOSPHERIC PRESSURE (OPERATING): 700hPa to 1060hPa
Technical Information
To Next Page
Loading...
Need help?
General
