13OPERATING INSTRUCTIONSPULSE PRO User Manual
ADJUST THE INTENSITY
Adjust the intensity level by tapping the Intensity Button on the Home Screen. The Level Adjustment
Screen will open. Tap on the up and down arrows to adjust the intensity level between level 1 and 10.
When you are done, tap the Back Button in the upper left of the screen to return to the Home Screen.
Intensity level 1 is the gentlest setting. The massage becomes stronger as the intensity level is
increased to a maximum intensity level of 10.
The currently selected intensity level will be displayed on the Intensity Button on the Home Screen.
Intensity can be adjusted while the session is running. Tap the Intensity Button to select the
desired intensity. The system will stop for 10 seconds and the cycle will restart in the foot, hand, or
thigh at the new intensity.
Tap the information icon in the lower right of the screen for helpful tips.
ADJUST THE SESSION TIME
The session time can be adjusted by tapping the Session Time Button on the Home Screen. The Time
Adjustment screen will open. Tap on the up and down arrows to adjust the number of minutes for the
session. When you are done, tap the Back Button in the upper left of the screen to return to the Home
Screen.
The currently selected time will be displayed on the Session Time Button on the Home Screen.
Session Time can be adjusted between 10 minutes and 2 hours 55 minutes.
Tap the information icon in the lower right of the screen for helpful tips.
Continuous Mode can be enabled allowing the system to run until the session is manually
stopped. To enter Continuous Mode, tap the increase time button until the time shows 2 hours 55
minutes and then tap one more time. To exit Continuous Mode, tap the down arrow.
To Next Page
Loading...
Need help?
General
